Symptom Table

2010 Ford Mustang Base, 2D Coupe, AutomaticSECTION Symptom Table
WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
SYMPTOM TABLE

Condition Possible Sources Action
  • No communication with the smart junction box (SJB) module
  • Circuitry
  • SJB
  • The wipers are inoperative
  • Fuse
  • Wiper switch
  • Wiper high current relay
  • Windshield wiper motor and module
  • Circuitry
  • Smart junction box (SJB)
  • The rear window wiper is inoperative
  • Fuse
  • Wiper switch
  • Ignition switch
  • Circuitry
  • Rear window wiper motor
  • The wipers stay on continuously
  • Wiper switch
  • Circuitry
  • Windshield wiper motor
  • The rear window wiper stays on continuously
  • Rear window wiper motor
  • Wiper switch
  • Circuitry
  • The high/low wiper speeds do not operate correctly (intermittent wiper mode OK)
  • Wiper switch
  • Circuitry
  • Windshield wiper motor
  • The intermittent wiper speed does not operate correctly (high/low speeds OK)
  • Wiper switch
  • Circuitry
  • Windshield wiper motor
  • The wipers do not operate correctly - rear window
  • Wiper switch
  • Circuitry
  • Rear window wiper motor
  • The wipers do not operate correctly in the MIST position
  • Wiper switch
  • Circuitry
  • Windshield wiper motor
  • The wash and wipe function is inoperative - rear
  • Wiper switch
  • Circuitry
  • Rear window wiper motor
  • Washer pump
  • The washer pump is inoperative
  • Washer pump
  • Wiper switch
  • Windshield wiper motor
  • Rear window wiper motor (Freestyle only)
  • Circuitry
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.