Windshield Glass: Notes

2010 Ford Mustang Base, 2D Coupe, AutomaticSECTION Notes
WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL(S) SPECIFICATIONS

G04622341Courtesy of FORD MOTOR CO.
Interior Auto Glass Cut-Out Knife Kit
164-R2450 or equivalent
G04622342Courtesy of FORD MOTOR CO.
Pneumatic Knife with Offset Blade
107-R1511 or equivalent
G04622343Courtesy of FORD MOTOR CO.
The Pumper
164-R2459 or equivalent
MATERIAL SPECIFICATIONS

Item Specification
DOW AUTOMOTIVE 2-HOUR CURE  
Dow Urethane Adhesive Betaseal® Express -
Dow Urethane One Step Glass Primer Betaprime® 5500/5500 A/5500SA -
SIKA 2-HOUR CURE  
Sika Urethane Adhesive Sika Tack ASAP -
Sika Urethane Metal and Glass Primer Sika 206 G+P -
Ultra-Clear Spray Glass Cleaner ZC-23 ESR-M14P5-A
Fig 1: Locating Windshield Glass And Windshield Glass Moulding
G04622344Courtesy of FORD MOTOR CO.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.