Fuel System: Notes

The fuel system consists of the:

• L-shaped fuel tank.
• Fuel Pump (FP) module.
• FP  control module.
• Easy Fuel™ (capless) fuel tank filler pipe assembly.
• Inertia Fuel Shutoff (IFS) switch.
• fuel tubes (liquid and vapor).
• fuel injectors.
• fuel rail.
• Fuel Tank Pressure (FTP) sensor (part of the fuel vapor tube assembly).

The vehicle:

• uses a 2-speed Mechanical Returnless Fuel System (MRFS).
• uses a standard (L-shaped) fuel tank.
• has a FP  module that supplies fuel under pressure to the fuel rail.
• has a lifetime fuel filter (serviced as part of the FP  module).
• has a serviceable fuel level sender mounted on the FP  module.
• has an Easy Fuel TM (capless) fuel tank filler pipe assembly, which cannot be modified in any way and is serviced only by the installation of a new fuel tank filler pipe assembly.
• has a supplemental refueling adapter, located behind RR quarter trim access panel.
• has a FP  module that operates on 10 or 12 volts depending on load, that supplies fuel under pressure to the fuel rail.
• has a FP  control module located behind the fuel tank, mounted to the underside of the vehicle.
• has an IFS  switch located behind the RH cowl trim panel.
• has fuel tubes (liquid and vapor) along with brake tubes mounted on the underside of the vehicle in a bundle.
• has a FTP  sensor (part of the fuel vapor tube assembly).
• is equipped with a sequential Multi-Port Fuel Injection (MFI) system.
• uses separately controlled fuel injectors for each cylinder. The fuel injectors are mounted to the intake manifold.
• fuel injectors are supplied with pressurized fuel from the FP  module to the fuel rail.
• fuel injection rail pressure is controlled by the electronic FP  module which is enabled by the PCM.