Torque Specification Chart

2010 Ford Mustang Base, 2D Coupe, AutomaticSECTION Torque Specification Chart
TORQUE SPECIFICATION CHART

Description Nm lb-ft lb-in
Battery cable harness bracket bolt (4.0L) 27 20 -
Battery cable harness bracket nut 8 - 71
Battery cable terminal 7 - 62
Battery ground cable body terminal bolt 10 - 89
Battery ground cable engine terminal bolt (4.0L) 27 20 -
Battery ground cable engine terminal nut (4.6L, 5.4L) 25 18 -
Battery hold-down bolt 8 - 71
Battery tray bolts 11 - 97
Battery Junction Box (BJB) nut 10 - 89
Generator B+ terminal nut 8 - 71
Generator harness terminal nut 8 - 71
Starter solenoid positive cable terminal nut 12 - 106
Starter solenoid wire terminal nut (4.0L) 5 - 44
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.