Front Controls Interface Module (FCIM) - Fusion, Milan Without Navigation

2010 Ford Fusion SEL, 2.5 ASECTION Front Controls Interface Module (FCIM) - Fusion, Milan Without Navigation
FRONT CONTROLS INTERFACE MODULE (FCIM) DIAGNOSTIC TROUBLE CODE (DTC) LIST - FUSION, MILAN WITHOUT NAVIGATION

DTC Description Action
B1318 Battery Voltage Low Go To PINPOINT TEST AU .
B1342 ECU  is Faulted CLEAR the DTCs. REPEAT the self-test. If DTC B1342 is still present, INSTALL a new Front Controls Interface Module (FCIM). REFER to FRONT CONTROLS INTERFACE MODULE (FCIM) - FUSION, MILAN . REPEAT the self-test.
B2924 Audio Button Stuck Go To PINPOINT TEST J .
U0140 Lost Communication With Body Control Module (GEM  ) Go To PINPOINT TEST AE .
U0164 Lost Communication With HVAC Control Module (EATC  ) Go To PINPOINT TEST AH .
U0184 Lost Communication With Radio (ACM  ) Go To PINPOINT TEST AJ .
U2050 No Application Present REFER to MODULE CONFIGURATION .
U2051 One or More Calibration Files Missing/Corrupt REFER to MODULE CONFIGURATION .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.