Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Engine Oil Replacement Reminder Reset - Procedure 28
2010 Ford Fusion SEL, 2.5 ASECTION Engine Oil Replacement Reminder Reset - Procedure 28
- Settings
- Press the right arrow button, then from this menu scroll to the following message.
- Advanced Settings
- Press OK
- Vehicle
- Press the right arrow button, then from this menu scroll to the following message.
- Oil Life
- Press the right arrow button, then from this menu scroll to the following message.
- Hold OK to Reset
- Press and hold the OK button until the instrument cluster displays the following message.
Reset Successful
- When the oil change indicator resets the instrument cluster displays 100%.
Remaining Life {00}%
- If the instrument cluster displays one of the following messages, repeat the process.
Not Reset
- Reset Cancelled
- Press and hold the OK button until the instrument cluster displays the following message.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.