Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2010FUSION SEL, 2.5 AREPAIR AND DIAGNOSIS (SINGLE PAGE)GENERAL INFORMATIONRESET PROCEDURESMAINTENANCE REMINDER LIGHT (RESET PROCEDURES)ENGINE OIL REPLACEMENT REMINDERENGINE OIL REPLACEMENT REMINDER RESET - PROCEDURE 25BASE CLUSTER
2010 Ford Fusion SEL, 2.5 A
Base Cluster
2010 Ford Fusion SEL, 2.5 ASECTION Base Cluster
Use the information display controls on the steering wheel to reset the oil change indicator.
From the main menu scroll to:
- Driver assist
- Press the right arrow button, then from this menu scroll down to the following message.
- Maintenance Monitor
- Press the right arrow button, then from this menu scroll down to the following message.
- Oil Life % Hold to Reset
- Press and hold the OK button until the instrument cluster displays the following message.
- Reset Complete
- If the instrument cluster displays the following message, repeat the process.
- Reset Cancelled
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.