Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2010FUSION SEL, 2.5 AREPAIR AND DIAGNOSIS (SINGLE PAGE)GENERAL INFORMATIONDTC INDEXREAR VIEW MIRRORS DTCSDRIVER DOOR MODULE (DDM)
2010 Ford Fusion SEL, 2.5 A
Driver Door Module (DDM)
2010 Ford Fusion SEL, 2.5 ASECTION Driver Door Module (DDM)
DRIVER DOOR MODULE DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| B1667 | Mirror Driver Up/Down Motor Stalled | Go To PINPOINT TEST D . |
| B1668 | Mirror Driver Right/Left Motor Stalled | Go To PINPOINT TEST D . |
| B1733 | Mirror Driver Vertical Switch Circuit Failure | Go To PINPOINT TEST D . |
| B1737 | Mirror Driver Horizontal Switch Circuit Failure | Go To PINPOINT TEST D . |
| B1741 | Mirror Passenger Vertical Switch Circuit Failure | Go To PINPOINT TEST D . |
| B1745 | Mirror Passenger Horizontal Switch Circuit Failure | Go To PINPOINT TEST D . |
| B2223 | Driver Mirror Drive Circuit Failure | Go To PINPOINT TEST D . |
| B2320 | Driver Mirror Horizontal Feedback Potentiometer Circuit Failure | Go To PINPOINT TEST D . |
| B2322 | Driver Mirror Horizontal Feedback Potentiometer Circuit Short to Battery | Go To PINPOINT TEST D . |
| B2324 | Driver Mirror Vertical Feedback Potentiometer Circuit Failure | Go To PINPOINT TEST D . |
| B2326 | Driver Mirror Vertical Feedback Potentiometer Circuit Short to Battery | Go To PINPOINT TEST D . |
| All other DTCs | - | REFER to DIAGNOSTIC TROUBLE CODE (DTC) TABLE . |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.