Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2010FOCUS SES, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 863 (ENGINE CONTROLS - DIAGNOSTIC METHODS - (HYBRID))CLEAR THE CONTINUOUS DIAGNOSTIC TROUBLE CODES (DTCS) IN THE TRANSAXLE CONTROL MODULE (TCM)DESCRIPTION
2010 Ford Focus SES, 2D Coupe, Standard
Clear The Continuous Diagnostic Trouble Codes (DTCs) In The Transaxle Control Module (TCM): Description
2010 Ford Focus SES, 2D Coupe, StandardSECTION Description
WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Clearing the continuous DTCs in the TCM can be carried out only with the key in the ON position. It can not be carried out once the key is cycled to the START position.
Clearing the continuous DTCs in the TCM allows the scan tool to command the TCM to clear all DTCs along with freeze frame information.
The following events occur when the continuous DTCs are cleared in the TCM:
- Clears the number of DTCs.
- Clears the DTCs.
- Clears the freeze frame data.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.