Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSFORD2010FOCUS SES, 2D COUPE, STANDARDREPAIR AND DIAGNOSISENGINE MECHANICALMECHANICALENGINE MECHANICAL - 2.0LIN-VEHICLE REPAIRTIMING DRIVE COMPONENTSINSTALLATION

2010 Ford Focus SES, 2D Coupe, Standard

Timing Drive Components: Installation

2010 Ford Focus SES, 2D Coupe, StandardSECTION Installation

Install the camshaft drive gears and the bolts. Do not tighten the bolts at this time.

Fig 1: Locating Camshaft Sprockets Bolts
Courtesy of FORD MOTOR CO.
Install the LH timing chain guide and bolts.
- Tighten to 10 Nm (89 lb-in).
Fig 2: Locating LH Timing Chain Guide Bolts
Courtesy of FORD MOTOR CO.
Install the timing chain.

Fig 3: Locating Timing Chain
Courtesy of FORD MOTOR CO.
Install the RH timing chain guide.

Fig 4: Locating Timing Chain Guide
Courtesy of FORD MOTOR CO.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.