Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2010FOCUS SES, 2D COUPE, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)GENERAL INFORMATIONDTC INDEXINFORMATION AND ENTERTAINMENT SYSTEMS DTCSFRONT CONTROLS INTERFACE MODULE (FCIM) DTC LIST
2010 Ford Focus SES, 2D Coupe, Standard
Front Controls Interface Module (FCIM) DTC List
2010 Ford Focus SES, 2D Coupe, StandardSECTION Front Controls Interface Module (FCIM) DTC List
Front Controls Interface Module (FCIM) DTC List
| DTC | Description | Action |
|---|---|---|
| B1318 | Battery Voltage Low | GO to PINPOINT TEST V . |
| B1342 | ECU is Faulted | CLEAR the DTCs. CARRY OUT the self-test. If DTC B1342 is retrieved again, INSTALL a new Front Controls Interface Module (FCIM). refer to FRONT CONTROLS INTERFACE MODULE (FCIM) . TEST the system for normal operation. |
| B2924 | Audio Button Stuck | VERIFY no FCIM buttons are stuck and that no FCIM button is pressed during the self-test. CLEAR the DTCs. REPEAT the self-test. If DTC B2924 is retrieved again, INSTALL a new FCIM . refer to FRONT CONTROLS INTERFACE MODULE (FCIM) . TEST the system for normal operation. |
| U0140 | Lost Communication With Body Control Module(GEM ) | GO to PINPOINT TEST N . |
| U0184 | Lost Communication With Radio(ACM ) | GO to PINPOINT TEST AD . |
| U2050 | No Application Present | refer to MODULE CONFIGURATION . |
| U2051 | One or More Calibration Files Missing/Corrupt | refer to MODULE CONFIGURATION . |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.