SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2010FOCUS SE, 2D COUPE, STANDARDREPAIR AND DIAGNOSISBODY & FRAMESEAT SYSTEM - SEATSDIAGNOSIS AND TESTINGSEATSSYMPTOM CHART
2010 Ford Focus SE, 2D Coupe, Standard

Symptom Chart

2010 Ford Focus SE, 2D Coupe, StandardSECTION Symptom Chart
SYMPTOM CHART

Condition Possible Sources Action
  • One or both heated seat indicators fail to illuminate
  • HVAC module
  • INSTALL a new HVAC module. REFER to CLIMATE CONTROL . TEST the system for normal operation.
  • The heated seats are inoperative
  • Fuse
  • Wiring, terminals or connectors
  • No output from HVAC module
  • The heated seat is inoperative/does not operate correctly - driver
  • Wiring, terminals or connectors
  • Heated seat relay
  • Heater mat
  • HVAC module
  • The heated seat is inoperative/does not operate correctly - passenger
  • Wiring, terminals or connectors
  • Heated seat relay
  • Heater mat
  • HVAC module
  • The heated seat does not operate correctly - driver or passenger seat heats when the system is off
  • Wiring, terminals or connectors
  • Heated seat relay
  • HVAC module
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.