Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2010FOCUS S, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 135 (POWER STEERING SYSTEM)SPECIFICATIONSTORQUE SPECIFICATIONS
2010 Ford Focus S, Standard
Torque Specifications
2010 Ford Focus S, StandardSECTION Torque Specifications
WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Degas bottle mounting bolts | 7 | - | 62 |
| Inner tie-rod | 100 | 74 | - |
| Intermediate shaft-to-steering gear bolt | 25 | 18 | - |
| Power steering fluid cooler bolts | 6 | - | 53 |
| Power steering fluid reservoir nuts | 9 | - | 80 |
| Power steering line clamp plate bolt | 20 | 15 | - |
| Power steering pressure line bracket-to-engine bolts | 10 | - | 89 |
| Power steering pressure line fitting | 65 | 48 | - |
| Power steering pressure line fitting-to-pump adapter | 65 | 48 | - |
| Power steering pressure line bracket-to-engine bolts | 10 | - | 89 |
| Power steering pump nuts | 25 | 18 | - |
| Power steering return line bracket-to-frame bolts | 10 | - | 89 |
| Steering gear nuts | 117 | 86 | - |
| Tie-rod end jam nuts | 80 | 59 | - |
| Tie-rod end nuts | 90 | 66 | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.