Vehicle Certification (VC) Codes: Notes

2010 Ford Focus S, StandardSECTION Notes
WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Vehicle Certification (VC) Label Locator
GF0011175Courtesy of FORD MOTOR CO.

The VC label contains the manufacturer name, the month and year of manufacture, the certification statement and the VIN. It also includes the vehicle GVWR.

If a vehicle requires replacement of the VC label and is 4 years old or less, an authorized dealer must submit the VIN to their respective regional office. The regional office will submit a web form to the assembly plant for the replacement label. Once the label has been printed, a representative from the regional office will deliver the label to the dealer and witness installation on the vehicle. If a vehicle is more than 4 years old and requires a replacement label, the dealer must submit a request to the Department of Motor Vehicles.

Fig 2: VC Label Breakdown
GF0001680Courtesy of FORD MOTOR CO.
Item Description
1 Exterior paint code
2 Region code
3 Domestic special order code
4 Wheelbase code
5 Interior trim code
6 Tape/paint pinstripe code
7 Radio code
8 Axle code
9 Transmission code
10 Spring code
11 Powertrain calibration information
Fig 3: Exterior Paint Code
GF0001681Courtesy of FORD MOTOR CO.

Exterior paint codes may be listed as a 2-part code. The first set of letters/numbers listed indicate the primary body color. The second set of letters/numbers listed (if applicable) indicate a 2-tone or accent color. All colors are basecoat/clearcoat

Primary Body Color

  • BY - School Bus Yellow
  • CX - Dark Shadow Gray Metallic
  • DX - Dark Blue Pearl
  • E4 - Vermilion
  • G3 - Pueblo Gold
  • GG - Forest Green
  • JL - Dark Toreador Red
  • P - PTO paint (special order)
  • UA - Ebony (clear coat)
  • YN - Silver Metallic #2
  • YZ - Oxford White

2-Tone/Accent Color

  • CX - Dark Shadow Gray Metallic
  • YN - Silver Metallic #2
Fig 4: Wheelbase Code
GF0001682Courtesy of FORD MOTOR CO.
  • 138 - 3,505.2 mm (138 in) wheelbase
  • 158 - 4,013.2 mm (158 in) wheelbase
  • 176 - 4,470.4 mm (176 in) wheelbase
Fig 5: Interior Trim
GF0001683Courtesy of FORD MOTOR CO.

Interior trim is listed as a 2-part code. The first character indicates the trim type. The second character indicates the interior trim color.

Trim Type

  • A - Hampton vinyl, bucket seats
  • C - Mortar cloth, bucket seats
  • L - G-Grain leather, captain's chairs
  • L - Premium cloth, captain's chairs (Canada and Mexico)
  • M - Calvin cloth, captain's chairs
  • N - Calvin cloth, premium captain's chairs
  • X - No trim available, seats not included

Interior Trim Color

  • E - Medium Flint
  • W - Medium Pebble
  • X - No trim/no color
Fig 6: Tape/Paint Stripe
GF0001684Courtesy of FORD MOTOR CO.
  • A - Dark Toreador Red/Titanium
  • B - Light Titanium/Sandalwood
Fig 7: Radio Type
GF0001685Courtesy of FORD MOTOR CO.
  • 5 - Premium electronic AM/FM stereo with CD player
  • 7 - Electronic AM/FM stereo with clock
  • D - Radio prep package (no radio chassis), 6 speakers installed
  • G - Radio prep package (no radio chassis), 2 speakers installed
  • H - AM/FM stereo with CD player
  • R - Radio prep package (no radio chassis), 4 speakers installed
  • S - Electronic AM/FM stereo with 6-disc CD changer
  • Y - Radio delete
Fig 8: Axle Type
GF0001686Courtesy of FORD MOTOR CO.
  • 22 - 4.10 ratio, non-limited slip, single rear wheels
  • 24 - 3.73 ratio, non-limited slip, single rear wheels
  • 29 - 3.55 ratio, non-limited slip, single rear wheels
  • 32 - 4.10 ratio, non-limited slip, single rear wheels
  • 34 - 3.73 ratio, non-limited slip, single rear wheels
  • 39 - 3.55 ratio, non-limited slip, single rear wheels
  • 52 - 4.10 ratio, non-limited slip, dual rear wheels
  • 56 - 4.10 ratio, non-limited slip, single rear wheels
  • 82 - 4.10 ratio, non-limited slip, dual rear wheels
  • 83 - 4.56 ratio, non-limited slip, dual rear wheels
  • B2 - 4.10 ratio, limited slip, single rear wheels
  • B4 - 3.73 ratio, limited slip, single rear wheels
  • C2 - 4.10 ratio, limited slip, single rear wheels
  • C4 - 3.73 ratio, limited slip, single rear wheels
  • C9 - 3.55 ratio, limited slip, single rear wheels
  • E2 - 4.10 ratio, limited slip, dual rear wheels
  • E6 - 4.10 ratio, limited slip, single rear wheels
  • F2 - 4.10 ratio, limited slip, dual rear wheels
  • F3 - 4.56 ratio, limited slip, dual rear wheels
Fig 9: Transmission Code
GF0001687Courtesy of FORD MOTOR CO.
  • B - 5-speed automatic overdrive (5R110W), diesel
  • Q - 4-speed automatic overdrive (4R75E)
  • T - 5-speed automatic overdrive (5R110W)
Fig 10: Spring Code
GF0001688Courtesy of FORD MOTOR CO.

Spring codes are identified as a 4-part code. The first 2 characters listed identify the front spring codes. The second 2 characters listed identify the rear spring codes.

Front Springs

  • JJ - 3C24-5310-JA (coil)
  • KK - 3C24-5310-KA (coil)
  • LL - 3C24-5310-LA (coil)
  • MM - 3C24-5310-MA (coil)
  • NN - 3C24-5310-NA (coil)
  • PP - 3C24-5310-PA (coil)
  • RR - 3C24-5310-RA (coil)
  • SS - 3C24-5310-SA (coil)
  • TT - 3C24-5310-TA (coil)
  • UU - 3C24-5310-UA (coil)
  • VV - 3C24-5310-VA (coil)
  • XX - 8C24-5310-XO (coil)

Rear Springs

  • 66 - 8C24-5560-VB (coil)
  • 77 - 8C24-5560-BB (leaf)
  • CC - 7C24-5560-AD (leaf)
  • RR - 8C24-5560-RA (leaf)
  • SS - 8C24-5560-SA (leaf)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.