Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2010FOCUS S, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1065 (FRONT SUSPENSION SYSTEM)SPECIFICATIONSTORQUE SPECIFICATIONS
2010 Ford Focus S, Standard
Torque Specifications
2010 Ford Focus S, StandardSECTION Torque Specifications
WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Anti-lock brake system (ABS) wheel speed sensor bolt | 9 | - | 80 |
| ABS wheel speed sensor harness bolt | 15 | 11 | - |
| Front lower arm bolt | 115 | 85 | - |
| Lower ball joint pinch bolt nut | 63 | 46 | - |
| Lower stabilizer bar link nuts | 55 | 41 | - |
| Rear lower arm bolt | 175 | 129 | - |
| Stabilizer bar bushing bracket bolts | 70 | 52 | - |
| Strut piston rod-to-bushing nut | 103 | 76 | - |
| Strut-to-knuckle nuts and bolts | 115 | 85 | - |
| Strut upper bushing nuts | 40 | 30 | - |
| Tie-rod end-to-knuckle nut | 55 | 41 | - |
| Upper stabilizer bar link nuts | 63 | 46 | - |
| Wheel hub nut | 300 | 221 | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.