Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2010FOCUS S, STANDARDREPAIR AND DIAGNOSISBRAKESMECHANICAL - HYDRAULICFRONT DISC BRAKE SYSTEMREMOVAL AND INSTALLATIONFRONT BRAKE PADSMATERIAL
2010 Ford Focus S, Standard
Front Brake Pads: Material
2010 Ford Focus S, StandardSECTION Material
MATERIAL SPECIFICATIONS
| Item | Specification |
|---|---|
| High Performance DOT 3 Motor Vehicle Brake Fluid PM-1-C (US); CPM-1-C (Canada) | WSS-M6C62-A or WSS-M6C65-A1 |
ITEM DESCRIPTION
| Item | Part Number | Description |
|---|---|---|
| 1 | - | Brake caliper guide pin bolt (2 required) (part of 2386) |
| 2 | 2B120 | Brake caliper |
| 3 | 2001 | Brake pads (2 required) |
| 4 | - | Brake pad slide (2 required) (part of 2001) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.