Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2010FOCUS S, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)STEERINGMANUAL STEERINGSTEERING SYSTEMSPECIFICATIONSGENERAL SPECIFICATIONS CHART
2010 Ford Focus S, Standard
General Specifications Chart
2010 Ford Focus S, StandardSECTION General Specifications Chart
GENERAL SPECIFICATIONS CHART
| Item | Specification |
|---|---|
| Power Steering Pump | |
| Flow | 6.8-8.3L/min (1.8-2.2 gpm) Fluid at 41°-46°C (105°-115°F) Engine at 2,500 RPM |
| Minimum capacity | 4.9L/min (1.3 gpm) Fluid at 41°-46°C (105°-115°F) Engine at idle Pressure at 5,171 kPa (750 psi) |
| Pressure | 345 kPa (50 psi) Fluid at 41°-46°C (105°-115°F) Engine at 2,500 RPM |
| Relief pressure | 8274-9515 kPa (1,200-1,380 psi) |
| Power Steering Purge Vacuum | |
| Vacuum | 68-85 kPa (20-25 in/hg) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.