Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2010 Ford Explorer 4.6 8, AWDFACTORY OEM SERVICE PROCEDURE
Module Communications Network DTCS
Module Communications Network DTC Chart
| DTC | Description | Source | Action |
|---|---|---|---|
| U0073 | Control Module Communication Bus A Off | Transmission Control Module (TCM) | The module could not communicate on the network at a point in time. The fault is currently not present. CLEAR the DTC. REPEAT the network test with the scan tool. |
| U0100 | Lost Communication With ECMÂ /PCM | TCMÂ | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST A . |
| U0100:00 | Lost Communication With ECMÂ /PCM "A": No Sub Type Information | Accessory Protocol Interface Module (APIM) | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST A . |
| U0101 | Lost Communication With TCMÂ | 4X4 control module | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST B . |
| U0102 | Lost Communication With Transfer Case Control Module (4x4CM) | TCMÂ | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST E . |
| U0121 | Lost Communication With Anti-Lock Brake System (ABS) Control Module | TCMÂ | 4X4 control module CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST C . |
| U0140 | Lost Communication With Body Control Module (GEMÂ ) | Audio Control Module (ACM) Instrument Cluster (IC) Parking Aid Module (PAM) Rear Entertainment Module (RETM) |
CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST H . |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | ACMÂ APIMÂ Global Positioning System Module (GPSM) |
CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST H . |
| U0151:00 | Lost Communication With Restraints Control Module: No Sub Type Information | APIMÂ | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST D . |
| U0155 | Lost Communication With Instrument Panel Cluster (ICÂ ) Control Module | ACMÂ PAMÂ Smart Junction Box (SJB) |
CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST G . |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPCÂ ) Control Module: No Sub Type Information | ACMÂ APIMÂ GPSMÂ |
CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST G . |
| U0159 | Lost Communication With Parking Assist Control Module (PAMÂ ) | ICÂ | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST O . |
| U0159:00 | Lost Communication With Parking Assist Control Module "A": No Sub Type Information | ACMÂ | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST O . |
| U0162:00 | Lost Communication With Navigation Display Module: No Sub Type Information | ACMÂ | REFER to INFORMATION AND ENTERTAINMENT SYSTEMS . |
| U0164 | Lost Communication With HVAC Control Module (EATCÂ ) | SJBÂ | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST I . |
| U0164:00 | Lost Communication With HVAC Control Module: No Sub Type Information | ACMÂ | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST I . |
| U016A:00 | Lost Communication With Global Positioning System Module: No Sub Type Information | APIMÂ | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST P . |
| U0184 | Lost Communication With Radio (ACMÂ ) | RETMÂ Satellite Digital Audio Receiver System (SDARS) module |
CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST J . |
| U0184:00 | Lost Communication With Radio: No Sub Type Information | APIMÂ | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST J . |
| U0193 | Lost Communication With Digital Audio Control Module (SDARSÂ ) | ACMÂ RETMÂ |
CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST K . |
| U0193:00 | Lost Communication With Digital Audio Control Module "A": No Sub Type Information | ACMÂ | REFER to INFORMATION AND ENTERTAINMENT SYSTEMS . |
| U0196 | Lost Communication With Entertainment Control Module - Rear (AUX) | ACMÂ SDARSÂ module |
CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST L . |
| U0196:00 | Lost Communication With Entertainment Control Module - Rear "A": No Sub Type Information | ACMÂ APIMÂ |
CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST L . |
| U0197 | Lost Communication With Telephone Control Module | ACMÂ SDARSÂ module |
CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST Q . |
| U0197:00 | Lost Communication With Telephone Control Module: No Sub Type Information | ACMÂ | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST Q . |
| U0244 | Lost Communication With Running Board Control Module (PRBÂ ) | ICÂ | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST N . |
| U0253:00 | Lost Communication With Accessory Protocol Interface Module: No Sub Type Information | RCMÂ | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST Q . |
| U0422:00 | Invalid Data Received From Body Control Module: No Sub Type Information | APIMÂ GPSMÂ |
RETRIEVE and FOLLOW non-network DTCs from the SJBÂ . |
| U0423:00 | Invalid Data Received From Instrument Panel Cluster (IPCÂ ) Control Module: No Sub Type Information | APIMÂ GPSMÂ |
RETRIEVE and FOLLOW non-network DTCs from the ICÂ . |
| U046B:00 | Invalid Data Received From Global Positioning System Module: No Sub Type Information | APIMÂ | RETRIEVE and FOLLOW non-network DTCs from the GPSMÂ . |
| U0485:00 | Invalid Data Received From Radio: No Sub Type Information | APIMÂ | RETRIEVE and FOLLOW non-network DTCs from the ACMÂ . |
| U1900 | CANÂ Communication Bus Fault-Receive Error | 4X4 control module ABS module ACMÂ Driver Seat Module (DSM) ICÂ Occupant Classification System Module (OCSM) Power Running Board (PRB) module RCMÂ |
NOTE:
DTC U1900 sets in the module that is reporting a communication fault from another module on the data bus. The module that reports the fault is not the problem module. GO to SYMPTOM CHART
for the module that failed the network test. |
| U1901 | CANÂ Network #2 Communication Bus Fault - Receive Error | ABS module | REFER to VEHICLE DYNAMIC SYSTEMS . |
| U2013 | Compass Module Is Not Responding | ICÂ | REFER to INSTRUMENTATION, MESSAGE CENTER, AND WARNING CHIMES . |
| U2023 | Fault Received From External Node | 4X4 control module ABS module ICÂ PAMÂ |
U2023 is set when a module receives invalid network data from another module with a faulted input. RETRIEVE and REPAIR all non-network DTCs in the other modules on the network. REFER to MULTIFUNCTION ELECTRONIC MODULES for a list of all DTCs. |
| U2471 | Unexpected PRNDL State | PAMÂ | RETRIEVE and FOLLOW non-network DTCs from the other modules. REFER to MULTIFUNCTION ELECTRONIC MODULES for a list of all DTCs. |
| U2472 | Unexpected Ignition State | PAMÂ | RETRIEVE and FOLLOW non-network DTCs from the other modules. REFER to MULTIFUNCTION ELECTRONIC MODULES for a list of all DTCs. |
| U2473 | Unexpected Vehicle Speed (VSSÂ ) | ACMÂ PAMÂ |
RETRIEVE and FOLLOW non-network DTCs from the other modules. REFER to MULTIFUNCTION ELECTRONIC MODULES for a list of all DTCs. |
| U2510 | CANÂ - Invalid Data For Vehicle Security | ICÂ | REFER to ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) . |
| U2511 | CANÂ - Data Mis-Match (Receive Data Does Not Match Expected) | ICÂ | REFER to ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) . |
| U3000:88 | Control Module: Bus Off | APIMÂ | The module could not communicate on the network at a point in time. The fault is currently not present since the module is currently communicating with the scan tool reporting this DTC. CLEAR the DTC. REPEAT the network test with the scan tool. |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
