Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2010EDGE LIMITED, FWDREPAIR AND DIAGNOSISENGINE PERFORMANCEFUEL DELIVERYFUEL TANK & FUEL LINESSPECIFICATIONSTORQUE SPECIFICATION CHART
2010 Ford Edge Limited, FWD
Torque Specification Chart
2010 Ford Edge Limited, FWDSECTION Torque Specification Chart
TORQUE SPECIFICATION CHART
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Bundle retainer clip nut | 9 | - | 80 |
| Evaporative Emission (EVAP) shield bolts | 9 | - | 80 |
| Fuel tank bolts | 25 | 18 | - |
| Fuel tank bracket bolts | 25 | 18 | - |
| Fuel tank filler pipe bracket bolts | 9 | - | 80 |
| Fuel tank filler pipe flange screws | 3 | - | 27 |
| Fuel tank filler pipe hose clamps | 4 | - | 35 |
| Inertia Fuel Shutoff (IFS) switch bolts | 2 | - | 18 |
| Parking brake cable bracket bolts | 23 | 17 | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.