Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2009RANGER 2D PICKUP, 2.3 D, AUTOMATICREPAIR AND DIAGNOSISSTEERINGPOWER STEERINGPOWER STEERING SYSTEMSPECIFICATIONSTORQUE SPECIFICATIONS
2009 Ford Ranger 2D Pickup, 2.3 D, Automatic
Torque Specifications
2009 Ford Ranger 2D Pickup, 2.3 D, AutomaticSECTION Torque Specifications
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Front skid plate bolts | 12 | - | 106 |
| Inner tie rod | 100 | 74 | - |
| Lower steering column shaft-to-steering gear bolt | 55 | 41 | - |
| Outer tie-rod end nut | 80 | 59 | - |
| Power steering fluid cooler nuts | 40 | 30 | - |
| Power steering fluid reservoir bolts | 14 | - | 124 |
| Pressure line-to-pump fitting | 65 | 48 | - |
| Power steering pump bolts (2.3L) | 23 | 17 | - |
| Power steering pump bolts (4.0L) | 25 | 18 | - |
| Power steering pump pulley bolts (4.0L) | 25 | 18 | - |
| Steering gear nuts | 150 | 111 | - |
| Steering line clamp plate nut | 35 | 26 | - |
| Tie-rod jam nut | 80 | 59 | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.