Material Specifications

2009 Ford Ranger 2D Pickup, 2.3 D, AutomaticSECTION Material Specifications
WARNING: This page is about a different car, the 2008 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS

Item Specification Fill Capacity
Additive Friction Modifier
XL-3 (US); CXL-3 (Canada)
EST-M2C118-A 118.29 ml (4 oz)
Motorcraft SAE 75W-140 Synthetic Rear Axle Lubricant
XY-75W140-QL (US); CXY-75W140-1L (Canada) (vehicles with the trailer towing option or 4:10 ratio)
WSL-M2C192-A 2.37 L (5.0 pt)
Motorcraft SAE 80W-90 Premium Rear Axle Lubricant
XY-80W90-QL (US); CXY-80W90-1L (Canada); (Model 60/70 axles)
WSP-M2C197-A 1.54L (2.7 pt)
Premium Long-Life Grease
XG-1-C or XG-1-K (US); CXG-1-C (Canada)
ESA-M1C75-B -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.