Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2009RANGER 2D PICKUP, 2.3 D, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 306 (STEERING COLUMN)REMOVAL AND INSTALLATIONSTEERING COLUMNNOTES
2009 Ford Ranger 2D Pickup, 2.3 D, Automatic
Steering Column: Notes
2009 Ford Ranger 2D Pickup, 2.3 D, AutomaticSECTION Notes
WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Part Number | Description |
|---|---|---|
| 1 | - | Multifunction switch electrical connector (part of 14401) |
| 2 | - | Multifunction switch electrical connector (part of 14401) |
| 3 | - | Multifunction switch electrical connector (part of 14401) |
| 4 | - | Ignition switch electrical connector (part of 14401) |
| 5 | - | Brake shift interlock solenoid electrical connector (part of 14401) |
| 6 | - | Passive anti-theft system (PATS) electrical connector (part of 14401) |
| 7 | - | Wiring harness retainer (part of 14401) |
| 8 | - | Clockspring electrical connector (part of 14401) |
| 9 | 3530 | Upper steering column shroud |
| 10 | 3C529 | Steering column |
| 11 | 3F609 | Steering column tilt lever shank |
| 12 | 3530 | Lower steering column shroud |
| 13 | 55929 | Lower steering column shroud screws (3 required) |
| 14 | - | Overdrive cancel switch electrical connector (part of 14401) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.