Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2009RANGER 2D PICKUP, 2.3 D, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 297 (ENGINE MECHANICAL)SPECIFICATIONSTORQUE SPECIFICATIONS
2009 Ford Ranger 2D Pickup, 2.3 D, Automatic
Torque Specifications
2009 Ford Ranger 2D Pickup, 2.3 D, AutomaticSECTION Torque Specifications
WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| A/C compressor stud bolts | 25 | 18 | - |
| Accessory drive idler pulley bolt | 25 | 18 | - |
| Camshaft bearing cap boltsa | - | - | - |
| Camshaft sprocket bolta | - | - | - |
| Catalytic converter-to-exhaust manifold nut | 48 | 35 | - |
| Connecting rod bearing cap boltsa | - | - | - |
| Coolant bypass tube stud bolt | 25 | 18 | - |
| Coolant outlet adapter bolts | 25 | 18 | - |
| Coolant pump bolts | 25 | 18 | - |
| Coolant pump pulley bolts | 25 | 18 | - |
| Crankshaft main bearing cap boltsa | - | - | - |
| Crankshaft pulley bolta | - | - | - |
| Crankshaft rear seal retainer plate boltsa | - | - | - |
| Cylinder head bolta | - | - | - |
| Engine block coolant drain plug | 20 | - | 177 |
| Engine front covera | - | - | - |
| Engine mount bolts | 70 | 52 | - |
| Engine mount nuts | 90 | 66 | - |
| Engine Oil Pressure (EOP) switcha | - | - | - |
| EGR tube | 43 | 32 | - |
| Exhaust manifold heat shield bolts | 10 | - | 89 |
| Exhaust manifold nutsa | - | - | - |
| Exhaust manifold studs | 12 | - | 106 |
| Flexplate boltsa | - | - | - |
| Generator battery cable nut | 9 | - | 80 |
| Generator bolts | 25 | 18 | - |
| Generator bracket bolts | 10 | - | 89 |
| Ground strap nut | 10 | - | 89 |
| Ground strap-to-RH cylinder head stud bolt | 25 | 18 | - |
| Ground strap bolt | 10 | - | 89 |
| Heated Oxygen Sensor (HO2S)a | - | - | - |
| Ignition coil bolts | 6 | - | 53 |
| Intake manifold boltsa | - | - | - |
| Intake manifold crash bracket bolts | 25 | 18 | - |
| Intake manifold shield bolts | 10 | - | 89 |
| Intermediate steering shaft pinch bolt | 30 | 22 | - |
| Jackscrewsa | - | - | - |
| Knock Sensor (KS) nut | 20 | - | 177 |
| Oil cooler hose bolt | 10 | - | 89 |
| Oil filter adapter boltsa | - | - | - |
| Oil level indicator tube bolt | 10 | - | 89 |
| Oil pan boltsa | - | - | - |
| Oil pan drain plug | 23 | 17 | - |
| Oil pump boltsa | - | - | - |
| Oil pump screen and pickup tube bolts | 10 | - | 89 |
| Oil pump screen and pickup tube spacer | 25 | 18 | - |
| Oil pump screen cover and pickup tube-to-spacer bolt | 25 | 18 | - |
| Power steering pump bolts | 25 | 18 | - |
| Power steering tube bracket nut | 10 | - | 89 |
| Shield bolts | 25 | 18 | - |
| Spark plugs | 18 | - | 159 |
| Support bracket nuts | 10 | - | 89 |
| Timing chain guide bolts | 10 | - | 89 |
| Timing chain tensioner bolts | 25 | 18 | - |
| Torque converter inspection cover bolts | 19 | - | 168 |
| Torque converter nuts | 36 | 27 | - |
| Transmission bellhousing bolts | 48 | 35 | - |
| Transmission cooler tube bracket bolt | 15 | - | 133 |
| Transmission cooler tube bracket nut | 9 | - | 80 |
| Transmission mount insulator bolts | 90 | 66 | - |
| Transmission mount insulator nuts | 30 | 22 | - |
| Valve cover studs and boltsa | - | - | - |
a Refer to the appropriate procedure.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.