Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2009RANGER 2D PICKUP, 2.3 D, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 249 (ENGINE MECHANICAL - 4.0L SOHC)SPECIFICATIONSTORQUE SPECIFICATIONS
2009 Ford Ranger 2D Pickup, 2.3 D, Automatic
Torque Specifications
2009 Ford Ranger 2D Pickup, 2.3 D, AutomaticSECTION Torque Specifications
WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Accessory drive belt tensioner bolt | 47 | 35 | - |
| Accessory drive belt idler pulley bolt | 47 | 35 | - |
| Balance shaft bolts | 27 | 20 | - |
| Balance shaft chain guide bolts | 10 | - | 89 |
| Balance shaft chain tensioner bolts | 29 | 21 | - |
| Bell housing-to-cylinder block cradle bolts | 47 | 35 | - |
| Camshaft bearing cap boltsa | - | - | - |
| Camshaft Position (CMP) sensor bolt | 6 | - | 53 |
| Camshaft sprocket bolt | 85 | 63 | - |
| Camshaft tensioners | 44 | 32 | - |
| Catalytic converter-to-exhaust manifold nuts | 45 | 33 | - |
| Connecting rod bolts and nutsa | - | - | - |
| Coolant hose bracket | 45 | 33 | - |
| Coolant pump bolts | 10 | - | 89 |
| Coolant tube bracket bolt (M8) | 23 | 17 | - |
| Coolant tube bracket bolt (M12) | 34 | 25 | - |
| Crankshaft Position (CKP) sensor bolts | 10 | - | 89 |
| Crankshaft pulley bolta | - | - | - |
| Crankshaft main bearing cap boltsa | - | - | - |
| Cylinder block cradle bolts | 14 | - | 124 |
| Cylinder block cradle nuts | 10 | - | 89 |
| Cylinder block cradle bolts (inside)a | - | - | - |
| Cylinder block cradle Torx bolts | 10 | - | 89 |
| Cylinder block cradle rear Torx bolts | 8 | - | 71 |
| Cylinder block cradle inserts | 3 | - | 27 |
| Cylinder head bolts (M8)a | - | - | - |
| Cylinder head bolts (M12)a | - | - | - |
| Engine wiring harness-to-cylinder head bolts | 40 | 30 | - |
| Engine front cover bolts | 19 | - | 168 |
| Engine mount bracket bolts | 80 | 59 | - |
| Engine mount nut | 63 | 46 | - |
| Engine mount bolts | 70 | 52 | - |
| Exhaust manifold-to-EGR system module tube fittings | 40 | 30 | - |
| Exhaust manifold nuts | 23 | 17 | - |
| Exhaust manifold studs | 12 | - | 106 |
| Flexplate/flywheel boltsa | - | - | - |
| Front End Accessory Drive (FEAD) bracket bolts | 48 | 35 | - |
| Fuel rail bolts | 23 | 17 | - |
| Fuel rail supply tube bracket-to-LH valve cover bolt | 6 | - | 53 |
| Fuel rail supply tube bracket-to-LH cylinder head bolt | 10 | - | 89 |
| Generator bracket bolts and nut | 47 | 35 | - |
| Generator B+ terminal nut | 8 | - | 71 |
| Ground cable-to-RH strut tower bolt | 10 | - | 89 |
| Ground strap-to-cylinder block stud bolt | 10 | - | 89 |
| Ground strap-to-LH cylinder head bolt | 40 | 30 | - |
| Hood hinge bolts | 12 | - | 106 |
| Hydraulic chain tensioner, LHa | 44 | 32 | - |
| Hydraulic chain tensioner, RHa | 44 | 32 | - |
| Ignition coil bracket upper bolts | 9 | - | 80 |
| Ignition coil bracket lower bolts (M12) | 34 | 25 | - |
| Ignition coil bracket lower bolt (M8) | 24 | 18 | - |
| Intake manifold boltsa | - | - | - |
| Jackshaft chain guide bolts | 19 | - | 168 |
| Jackshaft chain tensioner bolts | 9 | - | 80 |
| Jackshaft rear sprocket bolta | - | - | - |
| Jackshaft front sprocket bolta | - | - | - |
| Jackshaft thrust plate bolts | 11 | - | 97 |
| Knock Sensor (KS) bolt | 20 | - | 177 |
| LH cassette-to-cylinder head bolt | 12 | - | 106 |
| LH cassette-to-cylinder block bolt | 19 | - | 168 |
| LH hydraulic chain tensioner | 44 | 32 | - |
| Oil filter adapter bolt | 57 | 42 | - |
| Oil level indicator tube bracket bolt | 11 | - | 97 |
| Oil pan bolts | 11 | - | 97 |
| Oil pan drain plug | 26 | 19 | - |
| Oil pump pickup tube bolt | 11 | - | 97 |
| Oil pump intermediate shaft bolts | 19 | - | 168 |
| Oil pump bolts | 19 | - | 168 |
| Oil pump drive bolt | 19 | - | 168 |
| Oil pump screen and pickup tube bolt | 10 | - | 89 |
| Power Distribution Box (PDB) B+ terminal bolt | 12 | - | 106 |
| PDB electrical connector bolt | 6 | - | 53 |
| Power Steering Pressure (PSP) tube-to-crossmember bolt | 11 | - | 97 |
| Power steering supply hose bracket-to-FEAD bracket bolt | 11 | - | 97 |
| Power steering pump bolts | 25 | 18 | - |
| Power steering pump pulley bolts | 25 | 18 | - |
| Pressure tube bracket nut | 7 | - | 62 |
| RH cassette-to-cylinder block bolt | 12 | - | 106 |
| RH cassette-to-cylinder head bolt | 10 | - | 89 |
| Spark plug | 17 | - | 150 |
| Starter motor wiring harness retainer bracket bolt | 40 | 30 | - |
| Steering column intermediate shaft-to-steering gear bolt | 25 | 18 | - |
| Steering gear-to-crossmember bolts | 115 | 85 | - |
| Suction hose bracket bolt | 8 | - | 71 |
| Thermostat housing bolts | 11 | - | 97 |
| Throttle Body (TB) bolts | 10 | - | 89 |
| Valve cover bolts and stud boltsa | - | - | - |
a Refer to the procedure.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.