Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2009RANGER 2D PICKUP, 2.3 D, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 233 (SEAT SYSTEM - SEATING)SPECIFICATIONSTORQUE SPECIFICATIONS
2009 Ford Ranger 2D Pickup, 2.3 D, Automatic
Torque Specifications
2009 Ford Ranger 2D Pickup, 2.3 D, AutomaticSECTION Torque Specifications
WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Front Seat | |||
| Recliner-to-backrest frame bolts | 55 | 41 | - |
| Recliner-to-cushion frame bolts | 55 | 41 | - |
| Safety belt buckle bracket-to-seat track nuts | 36 | 27 | - |
| Safety belt buckle-to-safety belt buckle bracket bolt | 42 | 31 | - |
| Seat track-to-cushion frame nuts | 36 | 27 | - |
| Seat track-to-floor bolts and nuts | 48 | 35 | - |
| Side air bag module bracket-to-backrest frame bolts | 10 | - | 89 |
| Side air bag module-to-bracket nuts | 6 | - | 53 |
| Rear Seat | |||
| Backrest pivot bracket-to-floor bolt | 23 | 17 | - |
| Backrest striker bolt | 23 | 17 | - |
| Backrest-to-floor bolt | 23 | 17 | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.