Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2009RANGER 2D PICKUP, 2.3 D, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 194 (REAR SUSPENSION SYSTEM)SPECIFICATIONSTORQUE SPECIFICATIONS
2009 Ford Ranger 2D Pickup, 2.3 D, Automatic
Torque Specifications
2009 Ford Ranger 2D Pickup, 2.3 D, AutomaticSECTION Torque Specifications
WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft |
|---|---|---|
| Brake caliper anchor plate bolts | 103 | 76 |
| Brake hose bracket bolt | 20 | 15 |
| Fuel tank strap bolt | 52 | 38 |
| Lateral stiffener bar nut | 115 | 85 |
| Lateral stiffener bar-to-body bolts | 62 | 46 |
| Lower arm bolts | 175 | 129 |
| Panhard rod bolts | 175 | 129 |
| Parking brake cable bracket bolt | 27 | 20 |
| Shock absorber lower bolt | 115 | 85 |
| Shock absorber upper nut | 40 | 30 |
| Stabilizer bar bracket nuts | 70 | 52 |
| Stabilizer bar link bolts | 115 | 85 |
| Upper arm bracket forward bolt | 175 | 129 |
| Upper arm bracket rearward bolts | 115 | 85 |
| Upper arm-to-upper arm bushing nut | 175 | 129 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.