Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2009RANGER 2D PICKUP, 2.3 D, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 189 (STEERING SYSTEM - GENERAL INFORMATION)SPECIFICATIONSGENERAL SPECIFICATIONS
2009 Ford Ranger 2D Pickup, 2.3 D, Automatic
General Specifications
2009 Ford Ranger 2D Pickup, 2.3 D, AutomaticSECTION General Specifications
WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Power Steering Gear | |
| Turning effort | 2.27 kg (5 lb) |
| Turns lock-to-lock (4.0L) | 3.13 |
| Turns lock-to-lock (4.6L) | 2.83 |
| Turns lock-to-lock (4.6L with optional 18-inch wheels) | 2.60 |
| Turns lock-to-lock (5.4L) | 2.60 |
| Power Steering Pump | |
| Flow | 4.0L and 4.6L - 8.35L/min (2.2 gpm) 5.4L - 7.57L/min (2.0 gpm) Fluid @ 41°-46°C (105°-115°F) 4.0L @ 2,150 RPM 4.6L @ 2,000 RPM |
| Minimum capacity | 4.9L/min (1.3 gpm) Fluid @ 41°-46°C (105°-115°F) Engine at idle Pressure @ 5,171 kPa (750 psi) |
| Pressure | 345 kPa (50 psi) Fluid @ 41°-46°C (105°-115°F) 4.0L @ 2,150 RPM 4.6L and 5.4L @ 2,000 RPM |
| Relief pressure | 9,653-10,549 kPa (1,400-1,530 psi) |
| Power Steering Purge Vacuum | |
| Vacuum | 68-85 kPa (20-25 in-Hg) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.