Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2009RANGER 2D PICKUP, 2.3 D, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 185 (ENGINE SYSTEM - GENERAL INFORMATION)SPECIFICATIONSMATERIAL
2009 Ford Ranger 2D Pickup, 2.3 D, Automatic
Section 185 (Engine System - General Information): Specifications: Material
2009 Ford Ranger 2D Pickup, 2.3 D, AutomaticSECTION Material
WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
Material
| Item | Specification | Fill Capacity |
|---|---|---|
| Dye-Lite® Gasoline Engine Oil Leak Detection Dye 164-R3700 (Rotunda) |
- | - |
| LOCTITE® Retaining Compound 620 High Temperature Loctite 620/Permatex 62050 |
WSK-N2G349-A9 | - |
| Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP (US); Motorcraft SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12 (Canada); or equivalent |
WSS-M2C930-A | - |
| Motorcraft SAE 5W-30 Premium Synthetic Blend Motor Oil XO-5W30-QSP (US); Motorcraft SAE 5W-30 Super Premium Motor Oil CXO-5W30-LSP12 (Canada); or equivalent |
WSS-M2C929-A | - |
| Motorcraft SAE 5W-50 Full Synthetic Motor Oil XO-5W50-QGT or equivalent |
WSS-M2C931-B | - |
| Threadlock 262 TA-26 |
WSK-M2G351-A6 | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.