Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2009RANGER 2D PICKUP, 2.3 D, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 16 (CHARGING SYSTEM - GENERAL INFORMATION)SPECIFICATIONSGENERAL SPECIFICATIONS
2009 Ford Ranger 2D Pickup, 2.3 D, Automatic
General Specifications
2009 Ford Ranger 2D Pickup, 2.3 D, AutomaticSECTION General Specifications
WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Dual Generator - Diesel | |
| Lower (4G) | 75/120 amps (max) @ 1,800-6,000 generator RPM, approximately 525-2,000 engine RPM |
| Upper (VR42) | 95/140 amps (max) @ 1,800-6,000 generator RPM, approximately 525-2,000 engine RPM |
| Voltage | 12 volts |
| Single Generator - Gas/Diesel | |
| Diesel (6G) | 65/110 amps (max) @ 1,800-6,000 generator RPM, approximately 525-2,000 engine RPM |
| Diesel (VR42) (Extra Heavy-Duty option) | 95/140 amp (max) @ 1,800-6,000 generator RPM, approximately 525-2,000 engine RPM |
| Gas (3G) | 70/115 amps (max) @ 1,800-6,000 generator RPM, approximately 525-2,000 engine RPM |
| Gas (6GLF) | 82/135 amps (max) @ 1,800-6,000 generator RPM, approximately 525-2,000 engine RPM |
| Voltage | 12 volts |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.