Power Steering Pump - 2.3L: Notes

2009 Ford Ranger 2D Pickup, 2.3 D, AutomaticSECTION Notes
WARNING: This page is about a different car, the 2008 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools

Illustration Tool Name Tool Number
GF0000628Courtesy of FORD MOTOR CO.
Installer Set, Teflon® Seal 211-D027 (D90P-3517-A) or equivalent
Material

Item Specification
MERCON® V Automatic Transmission Fluid
XT-5-QM (or XT-5-QMC) (US); CXT-5-LM12 (Canada)
MERCON® V
Fig 1: Exploded View Of Power Steering Pump - 2.3L With Torque Specifications
GF0047385Courtesy of FORD MOTOR CO.
Item Part Number Description
1 3A719 Pressure line-to-pump fitting
2 W705952 Power steering pump bolt (4 required)
3 C56697 Power steering pump supply hose
4 3A674 Power steering pump
5 N803257 Teflon® seal
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.