Valve Seals: Notes

2009 Ford Ranger 2D Pickup, 2.3 D, AutomaticSECTION Notes
WARNING: This page is about a different car, the 2008 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools

Illustration Tool Name Tool Number
GF0008941Courtesy of FORD MOTOR CO.
Compressor, Valve Spring 303-300 (T87C-6565-A)
GF0008942Courtesy of FORD MOTOR CO.
Compressor, Valve Spring 303-350 (T89P-6565-A)
GF0008943Courtesy of FORD MOTOR CO.
Compressor, Valve Spring 303-472 (T94P-6565-AH)
GF0008944Courtesy of FORD MOTOR CO.
Installer, Valve Stem Oil Seal 303-470 (T94P-6510-CH)
GF0008945Courtesy of FORD MOTOR CO.
Remover, Valve Stem Oil Seal 303-468 (T94P-6510-AH)
GF0003558Courtesy of FORD MOTOR CO.
Slide Hammer 307-005 (T59L-100-B)
Material

Item Specification
Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil
XO-5W20-QSP (US); Motorcraft SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12 (Canada); or equivalent
WSS-M2C930-A
Multi-Purpose Grease
XG-4 and/or XL-5
ESB-M1C93-B
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.