Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2009RANGER 2D PICKUP, 2.3 D, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 113 (INFORMATION SYSTEM AND ENTERTAINMENT SYSTEMS)GENERAL PROCEDURESAUDIO UNIT SHIPMENT MODEEXITING SHIPMENT MODE
2009 Ford Ranger 2D Pickup, 2.3 D, Automatic
Exiting Shipment Mode
2009 Ford Ranger 2D Pickup, 2.3 D, AutomaticSECTION Exiting Shipment Mode
WARNING: This page is about a different car, the 2008 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If the audio unit is removed, install the audio unit before beginning this procedure.
- Turn the key to ACC or RUN.
- Turn the audio unit on.
- Press and hold the LOAD button for approximately 2 seconds.
- The audio unit will enter loading mode, at which time the shipment mode will be exited.
- Turn the audio unit off.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.