Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2009RV CUTAWAY 6.8 SREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 108 (MODULE COMMUNICATIONS NETWORK)
2009 Ford RV Cutaway 6.8 S
Section 108 (Module Communications Network)
2009 Ford RV Cutaway 6.8 SSECTION Section 108 (Module Communications Network)
WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
- Description & Operation
- Diagnostic Tests
- Communications Network
- Notes
- Principles of Operation
- Inspection & Verification
- DTC Index
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test A: The PCM Does Not Respond To The Scan Tool, or No High Speed Controller Area Network (HS-CAN) Communication
- Pinpoint Test B: The ABS Module Does Not Respond To The Scan Tool
- Pinpoint Test C: The Instrument Cluster (IC) Does Not Respond To The Scan Tool
- Pinpoint Test D: The Lighting Control Module (LCM) Does Not Respond To The Scan Tool
- Pinpoint Test E: The Heating Ventilation Air Conditioning (HVAC) Module Does Not Respond To The Scan Tool
- Pinpoint Test F: The Vehicle Dynamics Module (VDM) Does Not Respond To The Scan Tool
- Pinpoint Test G: The Driver Door Module (DDM) Does Not Respond To The Scan Tool
- Pinpoint Test H: The Overhead Console Message Center (MC) Does Not Respond To The Scan Tool
- Pinpoint Test I: Intermittent No High Speed Controller Area Network (HS-CAN) Communication, One Or More Modules Are Not Responding During Network Test
- Pinpoint Test J: The Fire Suppression System Module (FSSM) Does Not Respond To The Scan Tool
- Pinpoint Test K: The Restraints Control Module (RCM) Does Not Respond To The Scan Tool
- Pinpoint Test L: No International Standards Organization (ISO) 9141 Network Communication, All Modules Are Not Responding
- Pinpoint Test M: No Standard Corporate Protocol (SCP) Network Communications, All Modules Are Not Responding
- Pinpoint Test N: No Power To The Scan Tool
- Communications Network
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.