Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2009RV CUTAWAY 6.8 SREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSDTC INDEXMODULE CONFIGURATION DTCS
2009 Ford RV Cutaway 6.8 S
Module Configuration DTCS
2009 Ford RV Cutaway 6.8 SSECTION Module Configuration DTCS
DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Source | Action |
|---|---|---|---|
| B2477 | Module Configuration Failure | ABS module (without Roll Stability Control (RSC®)) Audio Control Module (ACM) (without navigation) Parking Aid Module (PAM) Smart Junction Box (SJB) |
CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| B2900 | VIN Mismatch | ABS module | CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| P0602 | Powertrain Control Module Programming Error | PCM | CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| P0605 | Internal Control Module Read-Only Memory (ROM) Error | PCM | CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| P1639 | Vehicle ID Block Corrupted, Not Programmed | PCM | CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| U0300 | Internal Control Module Software Incompatibility | PCM | CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| U0300:00 | Internal Control Module Software Incompatibility: No Sub Type Information | Restraints Control Module (RCM) | REFER to SUPPLEMENTAL RESTRAINT SYSTEM article. |
| U201A:51 | Control Module Main Calibration Data: Not Programmed | ACM (with navigation) | REFER to INFORMATION AND ENTERTAINMENT SYSTEMS article. |
| U2050 | No Application Present | ABS module ACM (without navigation) SJB |
CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| U2051 | One or More Calibration Files Missing/Corrupt | ABS module PAM ACM (without navigation) |
CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | ACM
(with navigation) RCM |
CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | Instrument Panel Cluster (IPC) | CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | ACM (with navigation) | REFER to INFORMATION AND ENTERTAINMENT SYSTEMS article. |
| U2200:00 | Control Module Configuration Memory Corrupt: No Sub Type Information | RCM | REFER to SUPPLEMENTAL RESTRAINT SYSTEM article. |
| U2202 | Invalid Configuration Data Received | Trailer Brake Control (TBC) module | REFER to AUXILLIARY BRAKE SYSTEM article. |
| U3000:46 | Control Module: Calibration/Parameter Memory Failure | RCM | CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.