Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2009RV CUTAWAY 6.8 SREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCESYSTEMENGINE CONTROLS - PINPOINT TEST INDEX - (EXCEPT DIESEL & HYBRID)PINPOINT TEST INDEX
2009 Ford RV Cutaway 6.8 S
Pinpoint Test Index
2009 Ford RV Cutaway 6.8 SSECTION Pinpoint Test Index
| Pinpoint Test | Description |
|---|---|
| PINPOINT TEST A | NO START |
| PINPOINT TEST B | POWERTRAIN CONTROL MODULE (PCM) POWER RELAY |
| PINPOINT TEST C | REFERENCE VOLTAGE (VREF) |
| PINPOINT TEST DA | INTAKE AIR TEMPERATURE (IAT) SENSOR |
| PINPOINT TEST DC | MASS AIR FLOW (MAF) SENSOR |
| PINPOINT TEST DD | FUEL RAIL PRESSURE TEMPERATURE (FRPT) SENSOR |
| PINPOINT TEST DF | VEHICLE SPEED CIRCUIT (VSC) CHECK |
| PINPOINT TEST DG | KNOCK SENSOR (KS) |
| PINPOINT TEST DH | THROTTLE POSITION (TP) SENSOR |
| PINPOINT TEST DJ | AIR CONDITIONING EVAPORATOR TEMPERATURE (ACET) SENSOR |
| PINPOINT TEST DK | ACCELERATOR PEDAL POSITION (APP) SENSOR |
| PINPOINT TEST DL | CYLINDER HEAD TEMPERATURE (CHT) SENSOR |
| PINPOINT TEST DM | MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR |
| PINPOINT TEST DP | OUTPUT SHAFT SPEED (OSS) SENSOR/VEHICLE SPEED SENSOR (VSS)/TRANSFER CASE SPEED SENSOR (TCSS) |
| PINPOINT TEST DR | CAMSHAFT POSITION (CMP) SENSOR |
| PINPOINT TEST DS | AIR CONDITIONING PRESSURE (ACP) TRANSDUCER SENSOR |
| PINPOINT TEST DT | POWER STEERING PRESSURE (PSP) SENSOR |
| PINPOINT TEST DU | INTAKE AIR TEMPERATURE 2 (IAT2) SENSOR |
| PINPOINT TEST DV | THROTTLE BODY ASSEMBLY ELECTRONIC THROTTLE CONTROL (ETC) |
| PINPOINT TEST DW | HEATED OXYGEN SENSOR (HO2S) |
| PINPOINT TEST DX | ENGINE COOLANT TEMPERATURE (ECT) SENSOR |
| PINPOINT TEST DY | ENGINE OIL TEMPERATURE (EOT) SENSOR |
| PINPOINT TEST DZ | UNIVERSAL HEATED OXYGEN SENSOR (HO2S) |
| PINPOINT TEST EM | EMISSION COMPLIANCE |
| PINPOINT TEST FB | POWER TAKE OFF (PTO) |
| PINPOINT TEST FD | BRAKE PEDAL INPUTS |
| PINPOINT TEST FF | POWER STEERING PRESSURE (PSP) SWITCH |
| PINPOINT TEST H | FUEL CONTROL |
| PINPOINT TEST HC | FUEL DELIVERY SYSTEM |
| PINPOINT TEST HD | MISFIRE DETECTION MONITOR |
| PINPOINT TEST HE | EXHAUST GAS RECIRCULATION (EGR) SYSTEMS |
| PINPOINT TEST HF | CATALYST EFFICIENCY MONITOR AND EXHAUST SYSTEMS |
| PINPOINT TEST HG | POSITIVE CRANKCASE VENTILATION (PCV) SYSTEM |
| PINPOINT TEST HH | EXHAUST GAS RECIRCULATION SYSTEM MODULE (ESM) |
| PINPOINT TEST HK | VARIABLE CAMSHAFT TIMING (VCT) |
| PINPOINT TEST HM | SECONDARY AIR INJECTION (AIR) SYSTEM |
| PINPOINT TEST HU | INTAKE AIR SYSTEMS |
| PINPOINT TEST HV | COOLING FAN CLUTCH |
| PINPOINT TEST HX | EVAPORATIVE EMISSION (EVAP) SYSTEM AND MONITOR |
| PINPOINT TEST JB | SECONDARY IGNITION (COP) |
| PINPOINT TEST JC | SECONDARY IGNITION (COIL PACK) |
| PINPOINT TEST JD | CRANKSHAFT POSITION (CKP) SENSOR |
| PINPOINT TEST JE | INTEGRATED IGNITION COIL PACK A, B, OR C FAILURE |
| PINPOINT TEST JF | INTEGRATED IGNITION COIL ON PLUG COILS A THROUGH J FAILURE |
| PINPOINT TEST KA | FUEL PUMP (FP) RELAY |
| PINPOINT TEST KB | FUEL PUMP DRIVER MODULE |
| PINPOINT TEST KC | FUEL PUMP CONTROL MODULE |
| PINPOINT TEST KD | ELECTRIC EXHAUST GAS RECIRCULATION (EEGR) SYSTEM |
| PINPOINT TEST KE | IDLE AIR CONTROL (IAC) VALVE |
| PINPOINT TEST KF | FAN CONTROL (FC) RELAYS |
| PINPOINT TEST KG | FUEL INJECTOR |
| PINPOINT TEST KJ | SUPERCHARGER BYPASS CONTROL |
| PINPOINT TEST KM | AIR CONDITIONING CLUTCH (A/CC) RELAY CIRCUIT |
| PINPOINT TEST KN | VARIABLE SPEED ELECTRIC COOLING FAN |
| PINPOINT TEST KP | CHARGE AIR COOLER (CAC) PUMP |
| PINPOINT TEST NC | IGNITION ENGINE SPEED INPUT CIRCUIT |
| PINPOINT TEST ND | ENGINE RPM\VEHICLE SPEED LIMITER REACHED |
| PINPOINT TEST QA | UNABLE TO ACTIVATE SELF-TEST/NETWORK COMMUNICATION ERROR |
| PINPOINT TEST QB | KEEP ALIVE POWER (KAPWR) |
| PINPOINT TEST QC | DTC P1000: ON-BOARD DIAGNOSTIC (OBD) SYSTEMS READINESS TEST NOT COMPLETE |
| PINPOINT TEST QD | DTC P1260: PASSIVE ANTI-THEFT SYSTEM |
| PINPOINT TEST QE | ELECTRONIC THROTTLE CONTROL (ETC) SYSTEM |
| PINPOINT TEST TA | CLUTCH PEDAL POSITION (CPP) SWITCH |
| PINPOINT TEST TB | TRANSMISSION CONTROL SWITCH (TCS)/TRANSMISSION CONTROL INDICATOR LAMP (TCIL) |
| PINPOINT TEST Z | INTERMITTENT |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.