Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2009PICKUP F350 SUPER DUTY, 2D PICKUP, 6.8 Y, RWD, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSDTC INDEXDTC INDEX -- F250-F550 SUPER DUTYSPEED CONTROL DTCS
2009 Ford Pickup F350 Super Duty, 2D Pickup, 6.8 Y, RWD, Standard
Speed Control DTCS
2009 Ford Pickup F350 Super Duty, 2D Pickup, 6.8 Y, RWD, StandardSECTION Speed Control DTCS
PCM DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Perform Test |
|---|---|---|
| P0565 | Cruise Control ON Signal | Go to Pinpoint Test D . |
| P0566 | Cruise Control OFF Signal | Go to Pinpoint Test D . |
| P0567 | Cruise Control RESUME Signal | Go to Pinpoint Test D . |
| P0568 | Cruise Control SET Signal | Go to Pinpoint Test D . |
| P0569 | Cruise Control COAST Signal | Go to Pinpoint Test D . |
| P0578 | Cruise Control Multifunction Input A Circuit Stuck | Go to Pinpoint Test D . |
| P0579 | Cruise Control Multifunction Input A Circuit Range/Performance | Go to Pinpoint Test D . |
| P0581 | Cruise Control Multifunction Circuit High | Go to Pinpoint Test D . |
| P1703 | Brake Switch Out of Self-Test Range | Go to Pinpoint Test C . |
| P1572 | Brake Pedal Switch Circuit | Go to Pinpoint Test C . |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.