DTC P2610: - Electronic Control Module (ECM)/Powertrain Control Module (Pcm) Internal Engine Off Timer Performance

2009 Ford Pickup F350 Super Duty, 2D Pickup, 6.8 Y, RWD, StandardSECTION DTC P2610: - Electronic Control Module (ECM)/Powertrain Control Module (Pcm) Internal Engine Off Timer Performance
DTC P2610: - ELECTRONIC CONTROL MODULE (ECM)/POWERTRAIN CONTROL MODULE (PCM) INTERNAL ENGINE OFF TIMER PERFORMANCE

Description:  Indicates an error in the internal PCM engine off timer processor.
Possible Causes: 
  • Battery cables loose or intermittent connections
  • Keep alive power (KAPWR) circuit to PCM concern
  • Engine coolant temperature (ECT) sensor
  • Engine cooling system concerns
  • Electrical interference around vehicle or PCM
Diagnostic Aids:  Verify the PCM is at the latest calibration level.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to Pinpoint Test QB .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.