SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2009PICKUP F350 SUPER DUTY, 2D PICKUP, 6.8 Y, 4WD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 45 (MODULE CONFIGURATION SYSTEM -- F150)DIAGNOSIS AND TESTINGMODULE CONFIGURATIONPRINCIPLES OF OPERATIONAS-BUILT DATA
2009 Ford Pickup F350 Super Duty, 2D Pickup, 6.8 Y, 4WD, Standard

As-Built Data

2009 Ford Pickup F350 Super Duty, 2D Pickup, 6.8 Y, 4WD, StandardSECTION As-Built Data
WARNING: This page is about a different variant/trim than selected.

As-Built data is a VIN  -specific module configuration record. During vehicle build, the configuration from all modules is downloaded and stored in the As-Built database. As-Built data will not reflect customer preference items that have been changed from the default state. These items will need to be changed using programmable parameters after the module is configured.

NOTE: It is not necessary to obtain As-Built data unless directed to do so by the scan tool. This data may be accessed from the technician service publication website.

The following chart lists As-Built data addresses and describes specific module configuration information:

Module Configuration and Parameter Chart 

MODULE CONFIGURATION AND PARAMETER CHART

Module Module Address Requires PMI  Reprogram/Flash Capable Requires Adaptive Learning or Calibration Available Programmable Parameters
4X4 control module 761 No No No None
ABS module 760 Yes Yes
  • Stability control initialization
 None
Accessory Protocol Interface Module (APIM) 7D0 Yes Yes No None
Audio Control Module (ACM) 727 Yes Yes No None
Audio Digital Signal Processing (DSP) module 783 Yes Yes No None
Driver Seat Module (DSM) 744 Yes Yes No
  • Easy entry/exit
Dual Climate Controlled Seat Module (DCSM) 776 Yes Yes No None
Front Controls Interface Module (FCIM) 7A7 No No No None
Front Display Interface Module (FDIM) 7A6 Yes Yes No None
HVAC module - DATC  733 No No No None
HVAC module - EMTC  733 No Yes No None
Instrument Cluster (IC) 720 Yes Yes No
  • Trailer brake controller
Occupant Classification System Module (OCSM) 765 No No
  • Seat weight sensor rezero
 None
Parking Aid Module (PAM) 736 Yes Yes No None
PCM 7E0 Yes Yes
  • Adaptive airflow
  • Idle speed
  • Refueling event
  • Fuel trim
  • Axle ratio
  • Tire size
  • Speed control
  • Speed control system type
  • Snowplow package
Power Running Board (PRB) module 766 No Yes No None
Restraints Control Module (RCM) 737 Yes Yes
  • Seat weight sensor rezero
  • Stability control initialization
  • Driver seat Belt-Minder® activation
  • Passenger seat Belt-Minder® activation
Smart Junction Box (SJB) 726 Yes Yes
  • Tire Pressure Monitoring System (TPMS) sensor calibration
  • Autolock feature
  • Daytime Running Lamps (DRL) present
  • Remote Keyless Entry (RKE) feature
  • Tire placard pressure
Trailer Brake Control (TBC) module 757 No No No None
Transmission Control Module (TCM) 7E1 No Yes No None
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.