Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2009PICKUP F350 SUPER DUTY, 2D PICKUP, 6.8 Y, 4WD, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 45 (MODULE CONFIGURATION SYSTEM -- F150)DIAGNOSIS AND TESTINGMODULE CONFIGURATIONDTC CHART
2009 Ford Pickup F350 Super Duty, 2D Pickup, 6.8 Y, 4WD, Standard
DTC Chart
2009 Ford Pickup F350 Super Duty, 2D Pickup, 6.8 Y, 4WD, StandardSECTION DTC Chart
WARNING: This page is about a different variant/trim than selected.
NOTE:
Some modules on this vehicle utilize a 5-character DTC followed by a 2-character failure-type code. The failure-type code provides information about specific fault conditions such as opens, or shorts to ground. Continuous Memory DTCs have an additional 2-character DTC status code suffix to assist in determining DTC history.
DTC CHART
| DTC | Description | Source | Action |
|---|---|---|---|
| B2477 | Module Configuration Failure | Accessory Protocol Interface Module (APIM) | CARRY OUT APIM programming. REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING . |
| B2477 | Module Configuration Failure | ABS module Dual Climate Controlled Seat Module (DCSM) Driver Seat Module (DSM) Front Display Interface Module (FDIM) Instrument Cluster (IC) Smart Junction Box (SJB) |
CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| B2900 | VIN Mismatch | ABS module | CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| P0602 | Powertrain Control Module Programming Error | PCM | CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| P0605 | Internal Control Module Read Only Memory (ROM ) Error | PCM | CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| P1639 | Vehicle ID Block Corrupted, Not Programmed | PCM | CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| U0300 | Internal Control Module Software Incompatibility | PCM | CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| U0300:00 | Internal Control Module Software Incompatibility: No Sub Type Information | RCM | CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| U201A:51 | Control Module Main Calibration Data: Missing Calibration | Audio Control Module (ACM) Audio Digital Signal Processing (DSP) module |
CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| U201A:51 | Control Module Main Calibration Data: Missing Calibration |
Front Controls Interface Module (FCIM) | INSTALL a new FCIM . REFER to INFORMATION AND ENTERTAINMENT SYSTEMS . |
| U2050 | No Application Present | ABS module DCSM DDM DSM FDIM IC SJB |
CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| U2050 | No Application Present | APIM | CARRY OUT APIM programming. REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING . |
| U2050 | No Application Present | PRB module | INSTALL a new PRB module. REFER to EXTERIOR TRIM AND ORNAMENTATION . |
| U2051 | One or More Calibration Files Missing/Corrupt | FDIM | CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | ACM Audio DSP module HVAC module RCM |
CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | APIM | CARRY OUT APIM programming. REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING . |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | ACM Audio DSP module |
CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | APIM | CARRY OUT APIM programming. REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING . |
| U3000:46 | Control Module: Calibration/Parameter Memory Failure | 4X4 control module | INSTALL a new 4X4 control module. REFER to FOUR-WHEEL DRIVE (4WD) SYSTEMS . |
| U3000:46 | Control Module: Calibration/Parameter Memory Failure | RCM | CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| U3000:54 | Control Module: Missing Calibration | Occupant Classification System Module (OCSM) | INSTALL a new OCSM . REFER to SUPPLEMENTAL RESTRAINT SYSTEM . |
| U3000:54 | Control Module: Missing Calibration | PAM | CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| U3002:62 | Vehicle Identification Number: Signal Compare Failure | HVAC module RCM |
The PCM Vehicle Identification Number (VIN) is not correct. CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.