Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2009PICKUP F350 SUPER DUTY, 2D PICKUP, 6.8 Y, 4WD, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)GENERAL INFORMATIONDTC INDEXDTC INDEX -- F150
2009 Ford Pickup F350 Super Duty, 2D Pickup, 6.8 Y, 4WD, Standard
DTC Index -- F150
2009 Ford Pickup F350 Super Duty, 2D Pickup, 6.8 Y, 4WD, StandardSECTION DTC Index -- F150
- Anti-Lock Control DTCS
- Anti-Theft Systems (Pats) DTCS
- Automatic Transaxle / Transmission DTCS
- Brake
- Cruise Control System DTCS
- Entertainment Systems DTCS
- Information And Entertainment Systems
- Audio Control Module (ACM) - Without Navigation DTC Chart
- Audio Control Module (ACM) - With Navigation DTC Chart
- Front Controls Interface Module (FCIM) DTC Chart
- Front Display Interface Module (FDIM) DTC Chart
- Accessory Protocol Interface Module (APIM) - V1 DTC Chart
- Accessory Protocol Interface Module (APIM) - V2 DTC Chart
- Audio Digital Signal Processing (DSP) Module DTC Chart
- Information And Entertainment Systems
- Four-Wheel Drive Systems DTCS
- Instrument Cluster DTCS
- Lighting DTCS
- Module Communications Network DTCS
- MULTIFUNCTION Electronic Modules DTCS
- Parking Aid System DTCS
- Power Door Locks & Remote Keyless Entry Systems DTCS*
- Rear View Mirrors
- Seating DTCS
- Supplemental Restraints Systems DTCS
- Wheels And Tires DTCS
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.