Throttle Body

2009 Ford Fusion SEL, 3.0 1, FWDSECTION Throttle Body
WARNING: This page is about a different variant/trim than selected.
Fig 1: Exploded View Of Throttle Body With Torque Specification
GF0041345Courtesy of FORD MOTOR CO.
Item Part Number Description
1 14A464 Electronic throttle control electrical connector (part of 12B637)
2 W525952 Throttle Body (TB) coolant inlet hose clamp
3 9F475 TB coolant inlet hose
4 W525952 TB coolant outlet hose clamp
5 18C266 TB coolant outlet hose
6 W500305 TB bolt (4 required)
7 9F991 TB
8 - TB gasket (part of 9F991)
WARNING: Do not smoke, carry lighted tobacco or have an open flame of any type when working on or near any fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.