Torque Specifications

2009 Ford Fusion SEL, 3.0 1, FWDSECTION Torque Specifications
WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Description Nm lb-ft lb-in
Front impact severity sensor bolt 12 9 -
Hood latch assembly bolts 9 - 80
Hood latch assembly nut 9 - 80
Radiator support bracket bolt 12 9 -
Side impact sensor bolts (B- and C-pillar) 9 - 80
Restraints control module bolts 11 8 -
Steering wheel mounting pinion shaft bolt 12 9 -
Passenger air bag module bolts 8 - 71
Seat cushion bolts 15 11 -
Safety canopy module bolts 8 - 71
Safety belt buckle pretensioner bolt 40 30 -
Side air bag module nuts 5 - 44
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.