Steering System: Notes

2009 Ford Fusion SEL, 3.0 1, FWDSECTION Notes
WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL(S) CHART

G04679821Courtesy of FORD MOTOR CO.
Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool
G04679822Courtesy of FORD MOTOR CO.
Dial Thermometer
0-220°F 023-R0007 or equivalent
G04679823Courtesy of FORD MOTOR CO.
100W/12 Volt DC UV Lamp
164-R0751
G04679824Courtesy of FORD MOTOR CO.
Vacuum Pump Kit
416-D002 (D95L-7559-A) or equivalent
G04679825Courtesy of FORD MOTOR CO.
Evacuation Cap, Power Steering
211-265 or equivalent
MATERIAL CHART

Item Specification
MERCON® Multi-Purpose Automatic Transmission Fluid XT-2-QDX (US); XT-2-LM12 (Canada) MERCON®
Automatic Transmission/Power Steering Dye 164-R3701 or equivalent -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.