Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2009FUSION SEL, 3.0 1, FWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 599 (FRONT DRIVE HALFSHAFTS)SPECIFICATIONSTORQUE SPECIFICATIONS
2009 Ford Fusion SEL, 3.0 1, FWD
Torque Specifications
2009 Ford Fusion SEL, 3.0 1, FWDSECTION Torque Specifications
WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft |
|---|---|---|
| Brake caliper hose bolt | 22 | 16 |
| Catalytic converter support bracket bolts | 20 | 15 |
| Catalytic converter support bracket nuts | 23 | 17 |
| Damper fork bolt | 109 | 80 |
| Front lower control arm inner bolt | 110 | 81 |
| Front wheel hub nut | 255 | 185 |
| Halfshaft support bracket bolts | 55 | 41 |
| Intermediate shaft bearing support bolts | 40 | 30 |
| Lower arm ball joints nuts | 200 | 148 |
| Lower control arm bolt and nut | 103 | 76 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.