Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2009FUSION SEL, 3.0 1, FWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 378 (ANTI-LOCK BRAKE SYSTEM - VEHICLE DYNAMIC SYSTEMS)
2009 Ford Fusion SEL, 3.0 1, FWD
Section 378 (Anti-Lock Brake System - Vehicle Dynamic Systems)
2009 Ford Fusion SEL, 3.0 1, FWDSECTION Section 378 (Anti-Lock Brake System - Vehicle Dynamic Systems)
WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Description And Operation
- Diagnosis And Testing
- Anti-Lock Control
- Notes
- Special Tool(s)
- Principles of Operation
- ABS Module Configuration
- Electronic Brake Force Distribution
- Panic Assist Braking
- Inspection and Verification
- Anti-Lock Brake System (ABS) Module Diagnostic Trouble Code (DTC) Index
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test A: No Communication With The Anti-Lock Brake System (Abs) Module
- Pinpoint Test A: No Communication With the Anti-Lock Brake System (ABS) Module
- Pinpoint Test B: DTC B1676 - Battery Pack Voltage Out Of Range
- Pinpoint Test B: DTC B1676 - Battery Pack Voltage Out of Range
- Pinpoint Test C: DTC C1095 - Abs Hydraulic Pump Motor Circuit Failure
- Pinpoint Test C: DTC C1095 - ABS Hydraulic Pump Motor Circuit Failure
- Pinpoint Test D: DTC C1145, DTC C1155, DTC C1165, DTC C1175 - Wheel Speed Sensor Input Circuit Failure
- Pinpoint Test E: DTC C1233, DTC C1234, DTC C1235, DTC C1236 - Wheel Speed Sensor Input Signal Missing
- Anti-Lock Control - Hybrid
- Notes
- Special Tool(s)
- Principles of Operation
- Electronic Brake Distribution
- Sensor Cluster (Accelerometer)
- Inspection and Verification
- Anti-Lock Brake System (ABS) Module Diagnostic Trouble Code (DTC) Index
- Transmission Control Module (TCM) Diagnostic Trouble Code (DTC) Index
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test F: No Communication With The Anti-Lock Brake System (Abs) Module
- Pinpoint Test F: No Communication With The Anti-Lock Brake System (ABS) Module
- Pinpoint Test G: DTCs B1317/B1318- Battery Voltage High/Low
- Pinpoint Test G: DTCS B1317/B1318 - Battery Voltage High/Low
- PINPOINT TEST H: DTCs C1145, C1155, C1165 AND C1175 - WHEEL SPEED SENSOR INPUT CIRCUIT FAILURE
- Pinpoint Test H: DTCs C1145, C1155, C1165 AND C1175 - Wheel Speed Sensor Input Circuit Failure
- PINPOINT TEST I: DTCs C1141, C1142, C1143, C1144, C1222, C1233, C1234, C1235 AND C1236 - WHEEL SPEED SENSOR TONE RING TOOTH MISSING FAULT/WHEEL SPEED INPUT SIGNAL MISSING
- Pinpoint Test I: DTCs C1141, C1142, C1143, C1144, C1222, C1233, C1234, C1235 AND C1236 - Wheel Speed Sensor Tone Ring Tooth Missing Fault/Wheel Speed Input Signal Missing
- Pinpoint Test J: DTCs C2768, C2769, C2778, C2783, C1305, U1901 AND U2527 - Sensor Cluster Fault
- Pinpoint Test J: DTCS C2768, C2769, C2778, C2783. C1305, U1901 And U2527 - Sensor Cluster Circuit Fault
- Pinpoint Test K: DTC C1218 - Lamp Anti-Lock Brake System (ABS) Warning Output Circuit Failure
- Pinpoint Test K: DTC C1218 - Lamp Anti-Lock Brake System (Abs) Warning Output Failure
- Pinpoint Test M: DTCs C1187, C1188, C1189, C1327 and C1523 - Brake Fluid Level Sensor Circuit Fault
- Pinpoint Test N: DTCs C1322, C1323, C1324 and C1325 - Brake Hydraulic Master Cylinder Piston Travel Sensor Circuit Fault/Failure
- Pinpoint Test O: DTC C1526 - Brake Pedal Travel Sensor Fault
- Anti-Lock Control
- Removal And Installation
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.