Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSFORD2009FUSION SEL, 3.0 1, FWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 270 (FUEL SYSTEM-GENERAL INFORMATION)DIAGNOSIS AND TESTINGFUEL SYSTEMSYMPTOM CHART

2009 Ford Fusion SEL, 3.0 1, FWD

Symptom Chart

2009 Ford Fusion SEL, 3.0 1, FWDSECTION Symptom Chart

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.

SYMPTOM CHART

Condition	Possible Sources	Action
Slow to fill	Fuel tank filler pipe Fuel tank filler pipe vent tube, if equipped Evaporative emission (EVAP) system Fuel tank filler pipe check valve (part of the fuel tank filler pipe assembly) Fill limiting vent valve (mounted on the fuel tank)	GO to PINPOINT TEST A .
All other fuel system concerns	Fuel system components	REFER to the INTRODUCTION - GASOLINE article.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.