Section 1828 (Wiper System & Washer System): Specifications

2009 Ford Fusion SEL, 3.0 1, FWDSECTION Specifications
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL

Item Specification Fill Capacity
Motorcraft® Premium Quality Windshield Washer Fluid (Canada)
CXC-37-(A, B, D, and F) (Canada)
- -
Motorcraft® Premium Windshield Washer Concentrate (US)
ZC-32-A or B (US)
WSB-M8B16-A2 -
TORQUE SPECIFICATIONS

Description Nm lb-in
Windshield washer reservoir bolts 7 62
Windshield washer reservoir nut 7 62
Windshield wiper mounting arm and pivot shaft assembly bolts 5 44
Wiper motor-to-wiper mounting arm bolts 8 71
Wiper pivot arm nuts 20 177
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.