Power Steering Fluid Cooler: Notes

2009 Ford Fusion SEL, 3.0 1, FWDSECTION Notes
WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
Material

Item Specification
MERCON® V Automatic Transmission Fluid
XT-5-QM (or XT-5-QMC) (US); CXT-5-LM12 (Canada)
MERCON® V
Fig 1: Exploded View Of Power Steering Fluid Cooler With Torque Specifications
GF0046776Courtesy of FORD MOTOR CO.
Item Part Number Description
1 N606676 Cooling module mounting bracket bolts (2 required)
2 8125 Cooling module mounting bracket (2 required)
3 N806799 Cooling module side shield pin-type retainers (4 required)
4 8005 Radiator
5 3D746 Power steering fluid cooler
6 19E572 Cooling module side shields (2 required)
7 41201 Power steering fluid cooler pin-type retainer
8 3A713A Return hose
9 3A713B Return hose
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.