Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Engine Ignition
This vehicle uses a coil-on-plug electronic ignition system. The coil-on-plug ignition system consists of the:
- PCM.
- crankshaft position (CKP) sensor.
- ignition coil-on-plug.
- spark plugs.
The PCM and the CKP sensor are also part of the electronic engine controls system. Refer to ELECTRONIC ENGINE CONTROLS article.
Eight separate ignition coils:
- are controlled by the PCM for the correct firing sequence.
- are mounted directly above each spark plug.
The spark plugs:
- change the high voltage pulse into a spark which ignites the fuel and air mixture.
- originally equipped on the vehicle have a nickel alloy electrode for long life.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.