Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2009FUSION SEL, 3.0 1, FWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1332 (AUTOMATIC TRANSMISSION)SPECIFICATIONSSHIFT SPEEDS - 4.0L ENGINE
2009 Ford Fusion SEL, 3.0 1, FWD
Shift Speeds - 4.0L Engine
2009 Ford Fusion SEL, 3.0 1, FWDSECTION Shift Speeds - 4.0L Engine
WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
SHIFT SPEEDS - 4.0L ENGINE
| Throttle Position | Overdrive Position "D" | Axle Ratio |
|---|---|---|
| Shift | Shift Speed | |
| Closed | 5-4 | 37-42 km/h (23-26 mph) |
| 4-1 | 16-19 km/h (10-12 mph) | |
| Minimum | 1-2 | 19-21 km/h (12-13 mph) |
| Monitor PID | 2-3 | 27-31 km/h (17-19 mph) |
| TP Volt 1.25 | 3-4 | 34-35 km/h (21-22 mph) |
| 4-5 | 39-43 km/h (24-27 mph) | |
| Wide | 1-2 | 64-68 km/h (40-42 mph) |
| Open | 2-3 | 93-101 km/h (58-63 mph) |
| 3-4 | 140-145 km/h (87-90 mph) | |
| 4-5 | 171-174 km/h (106-108 mph) |
CAUTION:
Always obey local traffic laws, do not exceed posted limits.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.